一、Product characteristics/产品特点

In order to meet the needs of different users and working modes, the tactile temperature type quick-moving temperature controller of the system can be divided into automatic reset and manual reset. The installation modes are movable and combined. The widths of connecting terminals are 6.3mm, 4.8mm, 3.2mm flat feet, 45 bending feet, 90 bending feet, etc. This product is mainly used for thermal overload protection in electrical equipment and household appliances. Such as: water dispenser, disinfection cabinet, shower, dryer, medical equipment, etc.

系统触感温式速动型温控器，为满足不同用户需要、工作方式分自动复位和手动复位，安装方式有活动式、组合式。连接端子宽度有 6.3mm、4.8mm、3.2mm 平脚及 45℃弯脚、90℃弯脚等。该产品主要用于电气设备及家用电器中作热过载保护。如：饮水机、消毒柜、淋浴器、烘干机、医疗设备等。

二、Structure/产品结构

1.1 Relative humidity reaches 95% at + 20℃.1.Conditions of Use/使用条件

相对湿度在+20℃环境下达 95%

1.2 Atmospheric Pressure 86-106 Kpa

大气压力 86-106Kpa

1.3 Working Position: Arbitrary

工作位置: 任意2.Technical parameters/技术参数

1.1 Contact Form:Normally closed type

触点形式：常闭型或常开型

1.2 Contact Load: 250VAC 10A/16A/30A or 24VDC 10A

触点负载：250VAC 10A/16A/30A或 24VDC 10A

1.3 Product life: > 100,000 times or more

产品寿命：≥10万次以上

1.4 Insulation Resistance: Normal Temperature and Humidity (≥100MΩ)

绝缘电阻：常温常湿 ≥100MΩ

1.5 Contact Resistance: ≤50MΩ

接触电阻：≤50MΩ

1.6 Medium Pressure Resistance: ≥1500VAC

介质耐压：≥1500VAC

1.7 Vibration Intensity: 50HZ Single Amplitude 0.35mm

振动强度：50HZ 单幅 0.35mm

1.8 Impact Strength: 150m/S2

冲击强度：150m/S2

1.9 Product Weight: 10g

产品重量：10

Temperature Working Range: - 20℃~300℃ +5℃

温度工作范围 ：-20℃~300℃±5℃

3.Outline size/外形尺寸

4.Specification data sheet (-20℃ to 300℃)规格数据表（可定制-20℃至 300℃）